Šis puslapis lokalizuotas lietuvių kalbai ir nekeičia API, failų pavadinimų bei literalinių reikšmių
Pdf1.FileName := 'C:\MyDocument.pdf';
Pdf1.Active := True;
ShowMessage('Pages: ' + IntToStr(Pdf1.PageCount));
ShowMessage('Title: ' + Pdf1.Title);
ShowMessage('Author: ' + Pdf1.Author);
var
Stream: TMemoryStream;
begin
Stream := TMemoryStream.Create;
try
Stream.LoadFromFile('C:\MyDocument.pdf');
Pdf1.LoadDocument(Stream, True);
Pdf1.Active := True;
ShowMessage('PDF įkeltas iš srauto');
finally
Stream.Free;
end;
end;
Pdf1.CreateDocument;
Pdf1.Active := True;
Pdf1.AddPage(0, 612, 792);
Pdf1.PageNumber := 1;
Pdf1.AddText('Hello World!', 'Arial', 12, 100, 700, clBlack, $FF, 0.0);
Pdf1.UpdatePage;
Pdf1.SaveAs('C:\NewDocument.pdf');
Pdf1.Active := False;
var
PageText: WString;
RectText: WString;
begin
Pdf1.PageNumber := 1;
PageText := Pdf1.Text;
Memo1.Text := PageText;
RectText := Pdf1.TextInRectangle(100, 100, 500, 200);
ShowMessage('Tekstas stačiakampyje: ' + RectText);
end;
var
Position: Integer;
begin
Position := Pdf1.FindFirst('Hello', [seCaseSensitive]);
while Position >= 0 do
begin
ShowMessage('Rasta ties simboliu: ' + IntToStr(Position));
Position := Pdf1.FindNext;
end;
end;
Pdf1.PageNumber := 1;
Pdf1.AddText('Document Title', 'Times New Roman', 16, 100, 750, clBlue);
Pdf1.AddText('This is the document content.', 'Arial', 12, 100, 700, clBlack);
Pdf1.UpdatePage;
var
I: Integer;
MetricSize: Single;
FontBytes: TBytes;
begin
Pdf1.PageNumber := 1;
for I := 0 to Pdf1.ObjectCount - 1 do
if Pdf1.ObjectType[I] = otText then
begin
MetricSize := 12.0;
FontBytes := Pdf1.FontData[I];
Memo1.Lines.Add('Objektas ' + IntToStr(I));
Memo1.Lines.Add('Pagrindinis vardas: ' + Pdf1.FontBaseName[I]);
Memo1.Lines.Add('Šeima: ' + Pdf1.FontFamilyName[I]);
Memo1.Lines.Add('Įdėtas: ' + BoolToStr(Pdf1.FontIsEmbedded[I], True));
Memo1.Lines.Add('Svoris: ' + IntToStr(Pdf1.FontWeight[I]));
Memo1.Lines.Add('Kursyvo kampas: ' + IntToStr(Pdf1.FontItalicAngle[I]));
Memo1.Lines.Add('Pakilimas: ' + FloatToStr(Pdf1.FontAscent[I, MetricSize]));
Memo1.Lines.Add('Nusileidimas: ' + FloatToStr(Pdf1.FontDescent[I, MetricSize]));
Memo1.Lines.Add('Šrifto duomenų baitai: ' + IntToStr(Length(FontBytes)));
end;
if Pdf1.CharacterCount > 0 then
begin
Memo1.Lines.Add('Pirmo simbolio dydis: ' + FloatToStr(Pdf1.CharacterFontSize[0]));
Memo1.Lines.Add('Pirmo simbolio svoris: ' + IntToStr(Pdf1.CharacterFontWeight[0]));
Memo1.Lines.Add('Pirmo simbolio kampas: ' + FloatToStr(Pdf1.CharacterAngle[0]));
end;
end;
Demo\Delphi\FontProperties, Demo\CBuilder\FontProperties ir Demo\Lazarus\FontProperties projektai rodo tuos pačius metaduomenis per TPdf ir TPdfView
Demo\Delphi\ContentExtractionLab, Demo\CBuilder\ContentExtractionLab ir Demo\Lazarus\ContentExtractionLab projektai sujungia turinio išskyrimą į vieną darbo srautą. Jie atidaro arba sukuria PDF, leidžia naudotojams pasirinkti metaduomenis, puslapio tekstą, puslapio objektus, vaizdus, priedus, nuorodas, anotacijas, žymeles ir šrifto bei simbolių metrikas, tada sugeneruoja santrauką ir išsamią TXT arba JSON ataskaitą. Laboratorijoje taip pat yra visų arba jokių kategorijų parinkimas, ataskaitos kopijavimas į iškarpinę ir šaltinio PDF išsaugojimo veiksmai, kad naudotojai galėtų laikyti sugeneruotą pavyzdinį PDF greta jo išskyrimo ataskaitos. Senesni ExtractText, ExtractImages, Attachment ir FontProperties demonstraciniai projektai išlieka kryptingi pavyzdžiai; ExtractText palaiko puslapių diapazono ir puslapių skyriklio parinktis, kad sugeneruotų atskirtą pagal puslapius teksto išvestį Delphi, C++Builder ir Lazarus aplinkose, o ContentExtractionLab yra skersinis inventoriaus pavyzdys
var
I: Integer;
FieldInfo: TPdfFormFieldInfo;
begin
Pdf1.FormField[0] := 'John';
for I := 0 to Pdf1.FormFieldCount - 1 do
begin
FieldInfo := Pdf1.FormFieldInfo[I];
ShowMessage(FieldInfo.Name + ': ' + Pdf1.FormField[I]);
end;
end;
// Without flattening, FormField[i] := value writes only the /V entry —
// the visible appearance comes from the /AP stream and may not refresh
// GenerateFormAppearances regenerates /AP for every widget, then
// FlattenAllPages bakes every page's annotations and widgets into
// permanent, non-editable content
Pdf1.FileName := 'C:\Application.pdf';
Pdf1.Active := True;
Pdf1.FormField[0] := 'John Smith';
Pdf1.FormField[1] := 'john@example.com';
Pdf1.GenerateFormAppearances;
if Pdf1.FlattenAllPages then
Pdf1.SaveAs('C:\Application.flat.pdf');
Pdf1.Active := False;
var
I: Integer;
Bitmap: TBitmap;
begin
for I := 0 to Pdf1.BitmapCount - 1 do
begin
Bitmap := Pdf1.Bitmap[I];
try
Bitmap.SaveToFile('C:\ExtractedImage' + IntToStr(I) + '.bmp');
finally
Bitmap.Free;
end;
end;
end;
var
JpegStream: TFileStream;
begin
JpegStream := TFileStream.Create('C:\MyImage.jpg', fmOpenRead or fmShareDenyWrite);
try
Pdf1.AddJpegImage(JpegStream, 100, 500, 200, 150);
finally
JpegStream.Free;
end;
Pdf1.AddPicture(Image1.Picture, 100, 300, 150, 100);
Pdf1.UpdatePage;
end;
var
I: Integer;
Annotation: TPdfAnnotation;
begin
for I := 0 to Pdf1.AnnotationCount - 1 do
begin
Annotation := Pdf1.Annotation[I];
ShowMessage('Annotation ' + IntToStr(I) + ': ' + Annotation.ContentsText);
end;
end;
Pdf1.CreatePath(100, 100, 200, 150, fmAlternate, clYellow, $FF, True, clBlack, $FF, 2.0);
Pdf1.AddPath;
Pdf1.CreatePath(100, 100, fmNone, clBlack, $FF, True, clRed, $FF, 3.0);
Pdf1.LineTo(200, 100);
Pdf1.LineTo(150, 200);
Pdf1.ClosePath;
Pdf1.AddPath;
Pdf1.UpdatePage;
var
I: Integer;
Bookmarks: TBookmarks;
begin
Bookmarks := Pdf1.Bookmarks;
for I := 0 to Length(Bookmarks) - 1 do
ShowMessage(Bookmarks[I].Title + ' -> Page ' + IntToStr(Bookmarks[I].PageNumber));
end;
var
I: Integer;
Destination: TDestination;
begin
for I := 0 to Pdf1.DestinationCount - 1 do
begin
Destination := Pdf1.Destination[I];
if Destination.Name = 'Chapter1' then
begin
Pdf1.PageNumber := Destination.PageNumber;
Break;
end;
end;
end;
var
I: Integer;
AttachmentData: TBytes;
AttachmentName: WString;
FileStream: TFileStream;
begin
for I := 0 to Pdf1.AttachmentCount - 1 do
begin
AttachmentName := Pdf1.AttachmentName[I];
AttachmentData := Pdf1.Attachment[I];
FileStream := TFileStream.Create('C:\Extracted_' + string(AttachmentName), fmCreate);
try
if Length(AttachmentData) > 0 then
FileStream.WriteBuffer(AttachmentData[0], Length(AttachmentData));
finally
FileStream.Free;
end;
end;
if Pdf1.CreateAttachment('MyFile.txt') then
Pdf1.Attachment[Pdf1.AttachmentCount - 1] := TFile.ReadAllBytes('C:\MyFile.txt');
end;
Pdf1.AddPage(Pdf1.PageCount + 1, 612, 792);
Pdf1.AddPage(Pdf1.PageCount + 1, 595, 842);
Pdf1.AddPage(Pdf1.PageCount + 1, 400, 600);
var
SourcePdf: TPdf;
begin
SourcePdf := TPdf.Create(nil);
try
SourcePdf.FileName := 'C:\SourceDocument.pdf';
SourcePdf.Active := True;
Pdf1.ImportPages(SourcePdf, '1', Pdf1.PageCount + 1);
finally
SourcePdf.Free;
end;
end;
if Pdf1.PageCount > 1 then
Pdf1.DeletePage(Pdf1.PageCount);
// Create a compressed PDF document
Pdf1.CreateDocument;
Pdf1.Compressed := True; // ensure all streams are FlateDecode compressed (default)
Pdf1.Active := True;
Pdf1.AddPage(0, 595, 842); // A4 size
Pdf1.AddText('Hello World!', 'Arial', 24, 100, 700, clBlack, $FF, 0.0);
Pdf1.SaveAs('C:\Compressed.pdf');
Pdf1.Active := False;
// Save with options
Pdf1.SaveAs('C:\Output.pdf', saIncremental); // incremental save
Pdf1.SaveAs('C:\NoSecurity.pdf', saRemoveSecurity); // remove security
// Save to a specific PDF version target. The PDF version validator rejects
// any feature introduced after the chosen target (JBIG2Decode, MarkInfo,
// AES encryption, Polygon / Caret / Watermark / Redact annotations, ...)
if not Pdf1.SaveAs('C:\Legacy15.pdf', saNone, pv15) then
ShowMessage('Save rejected: document contains features newer than PDF 1.5');
// SaveAsPdfA post-processes the base save with an incremental update that
// injects an XMP metadata stream, an sRGB ICC OutputIntent, and an updated
// document catalog so the result is PDF/A-1b conformant. The bundled
// sRGB IEC61966-2.1 profile is used automatically when no custom profile
// is supplied
Pdf1.FileName := 'C:\Report.pdf';
Pdf1.Active := True;
if Pdf1.SaveAsPdfA('C:\Report.pdfa.pdf', pac1b) then
ShowMessage('Saved PDF/A-1b archive');
// PDF/A with a custom ICC profile (CMYK printing pipelines for example)
var
Opts: TPdfASaveOptions;
begin
Opts := Default(TPdfASaveOptions);
Opts.Conformance := pac1b;
Opts.IccProfileData := TFile.ReadAllBytes('C:\Profiles\Coated_GRACoL_2006.icc');
Pdf1.SaveAsPdfA('C:\Report.cmyk.pdfa.pdf', Opts);
end;
// In-memory PDF/A output
var
Stream: TMemoryStream;
begin
Stream := TMemoryStream.Create;
try
Opts := Default(TPdfASaveOptions);
Opts.Conformance := pac1b;
if Pdf1.SaveAsPdfAToStream(Stream, Opts) then
UploadToArchive(Stream);
finally
Stream.Free;
end;
end;
var
Validation: TPdfAValidationResult;
Issue: TPdfAValidationIssue;
begin
Pdf1.FileName := 'C:\Incoming\report.pdf';
Pdf1.Active := True;
// Cheap header-style probe — reads the conformance without iterating
// the full validator. Result: pacNone, pac1a, pac1b, pac2b, pac3b, or
// pacUnknown
case Pdf1.PdfAConformance of
pac1b: Status.Caption := 'PDF/A-1b';
pac2b: Status.Caption := 'PDF/A-2b';
pacNone: Status.Caption := 'Not PDF/A';
else
Status.Caption := 'Unknown conformance';
end;
// Full validator with per-issue diagnostics
Validation := Pdf1.ValidatePdfA;
Memo1.Lines.Add('Conformance: ' + GetEnumName(TypeInfo(TPdfAConformance),
Ord(Validation.Conformance)));
for Issue in Validation.Issues do
Memo1.Lines.Add('- ' + Issue.Description);
end;
Demo\Delphi\StandardsLab, Demo\CBuilder\StandardsLab ir Demo\Lazarus\StandardsLab projektai įkelia arba sukuria PDF, paleidžia ValidatePdfA, ValidatePdfUa, ValidatePdfE, ValidatePdfX, ValidatePdfR ir ValidatePdfVT, tada vienoje lentelėje parodo kiekvieną aptiktą atitikties lygį ir problemų skaičių. Jų įrašymo mygtukai kviečia SaveAsPdfA, SaveAsPdfUa, SaveAsPdfE, SaveAsPdfX, SaveAsPdfR ir SaveAsPdfVT, kad žymeklio išvesties eiga būtų matoma be papildomo pritaikyto karkaso
FPdfPreflightReport vienetas sujungia ValidatePdfA, ValidatePdfUa, ValidatePdfE, ValidatePdfX, ValidatePdfR ir ValidatePdfVT į vieną ataskaitos objektą. Demo\Delphi\PreflightReport, Demo\Lazarus\PreflightReport ir Demo\CBuilder\PreflightReport leidžia naudotojams pasirinkti standartus, sugeneruoti santrauką, peržiūrėti būseną, prioritetą, problemų kategorijas, kategorijų skaičius, kitus veiksmus, klaidų kodus ir rekomenduojamus veiksmus, perjungti peržiūrą tarp teksto, Markdown, JSON ir CSV bei eksportuoti TXT, HTML, Markdown, JSON arba CSV ataskaitas. Delphi GUI pavyzdys taip pat prideda Action Plan peržiūrą, kuri nesėkmingus standartus, prioritetus, klaidų kodus ir rekomendacijas sutraukia į taisymo kontrolinį sąrašą. Demo\Delphi\PreflightReportCli pateikia tą patį ataskaitos kelią kaip konsolinį darbo srautą su įvesties / išvesties argumentais, pasirenkamu slaptažodžiu, išvesties formato parinkimu, įskaitant plan / actionplan, standartų filtravimu, pasirenkamu vieno failo attach=output.pdf ataskaitos įterpimu, failon= CI kontrolės grįžimo kodais, batch=list.txt apdorojimu, batchdir=folder katalogo skenavimu su pasirenkama rekursija ir stabiliu pagal kelią rūšiuojamu apdorojimu, outdir=reports ataskaitų nukreipimu, nuo konfliktų apsaugotais dublikuojamų įvesties failų pavadinimų ataskaitų vardais, TXT / JSON / HTML santraukomis su bendrais ir pagal standartus suvestais būsenų skaičiais, CSV eilučių aprašais su kiekvienam įrašui pakartotais paleidimo nustatymais ir režimu be argumentų scenarijams bei CI darbams. Sugeneruota ataskaita nurodo, kad įtaisyti tikrintuvai apima žymeklio lygio ir pasirinktus failo lygio patikrinimus, todėl pilną turinio lygio preflight vis dar galima perduoti specializuotam tikrinimo varikliui
// LoadCustomDocument lets PDFium pull blocks from any seekable TStream on
// demand. The stream is NOT copied into memory, so multi-GB PDFs, remote
// HTTP body streams, and database-backed sources are all viable without
// an up-front buffer
var
FileStream: TFileStream;
begin
// Read-from-file streaming (no in-memory copy)
FileStream := TFileStream.Create('C:\Huge.pdf',
fmOpenRead or fmShareDenyWrite);
Pdf1.LoadCustomDocument(FileStream, True{AOwnsStream});
// ^^ ownership transferred — Pdf1 frees FileStream on UnloadDocument
Pdf1.Active := True;
ShowMessage('Pages: ' + IntToStr(Pdf1.PageCount));
end;
// Externally-owned stream (caller frees it after UnloadDocument)
var
Stream: TFileStream;
begin
Stream := TFileStream.Create('C:\Live.pdf',
fmOpenRead or fmShareDenyNone);
try
Pdf1.LoadCustomDocument(Stream, False);
Pdf1.Active := True;
DoWork;
Pdf1.Active := False;
finally
Stream.Free;
end;
end;
// FPdfAsync exposes IPdfCancellationToken /
// IPdfCancellationTokenSource for cancel-from-UI semantics that work
// across the long-running export and render paths
uses FPdfAsync;
var
CancelSource: IPdfCancellationTokenSource;
CancelToken: IPdfCancellationToken;
begin
CancelSource := PdfCancellationTokenSource;
CancelToken := CancelSource.Token;
// ... user clicks Cancel
CancelSource.Cancel;
// The worker periodically checks CancelToken.IsCancelled, or the render
// path polls it through PDFium's IFSDK_PAUSE callback
if CancelToken.IsCancelled then
Memo1.Lines.Add('Cancelled by user');
end;
// RenderPageProgressive lets a long high-DPI render abort mid-page when
// the user clicks Cancel, instead of blocking the caller until done
var
Status: TPdfProgressiveStatus;
Bitmap: TBitmap;
begin
Bitmap := TBitmap.Create;
try
Bitmap.PixelFormat := pf32bit;
Bitmap.SetSize(2480, 3508); // A4 @ 300 DPI
Status := Pdf1.RenderPageProgressive(Bitmap, 0, 0, Bitmap.Width,
Bitmap.Height, CancelToken, ro0, [reAnnotations], clWhite);
case Status of
prsDone: SaveBitmap(Bitmap);
prsCancelled: Memo1.Lines.Add('Render cancelled — partial result available');
prsFailed: Memo1.Lines.Add('PDFium reported FPDF_RENDER_FAILED');
end;
finally
Bitmap.Free;
end;
end;
// TPdfFuture<T> spins up a worker on a background thread and posts a
// TPdfFutureResult<T> envelope back to the main thread
//
// Important: TPdf serializes render calls per instance, but the worker still
// owns dispatch and document lifetime. Do not mutate a TPdf while a render is
// in flight; batch export usually keeps one TPdf per file
type
TRenderResult = record
Bitmap : TBitmap;
PageNo : Integer;
end;
var
Future: TPdfFuture<TRenderResult>;
begin
Future := TPdfFuture<TRenderResult>.Create(
function (const ACancelToken: IPdfCancellationToken): TRenderResult
var
LocalPdf: TPdf;
begin
LocalPdf := TPdf.Create(nil);
try
LocalPdf.FileName := 'C:\Huge.pdf';
LocalPdf.Active := True;
LocalPdf.PageNumber := 1;
Result.Bitmap := LocalPdf.RenderPage(0, 0, 2480, 3508);
Result.PageNo := 1;
finally
LocalPdf.Free;
end;
end,
procedure (const AResult: TPdfFutureResult<TRenderResult>)
begin
case AResult.State of
pfsSuccess: PaintBitmapToView(AResult.Value.Bitmap);
pfsCancelled: Log.Add('Cancelled');
pfsFailed: Log.Add('Worker failed: ' + AResult.ErrorMessage);
end;
end);
end;
// FPdfMatrix wraps PDFium's FS_MATRIX so callers can build a transform
// declaratively and hand it to FPDFPageObj_SetMatrix
uses FPdfMatrix, FPdfView;
var
M: TPdfMatrix;
RawMatrix: FS_MATRIX;
PageObj: FPDF_PAGEOBJECT;
begin
M := TPdfMatrix.Create;
try
M.Translate(72, 200); // move 1in right, ~2.8in up
M.Scale(0.5, 0.5); // half-size stamp
M.Rotate(15); // 15-degree CCW rotation
// M.HorizontalFlip;
// M.VerticalFlip;
// M.CentralFlip;
// M.Skew(10, 5);
// M.Multiply(Other); // post-multiply with another matrix
// Apply to any PDFium page object (text / path / image / form XObject)
RawMatrix := M.Handle;
FPDFPageObj_SetMatrix(PageObj, RawMatrix);
finally
M.Free;
end;
end;
// ImportPagesByIndex copies an explicit zero-based index array from a
// source PDF into this document. InsertAt = 0 inserts before page 1;
// PageCount appends
var
Source: TPdf;
begin
Source := TPdf.Create(nil);
try
Source.FileName := 'C:\Report.pdf';
Source.Active := True;
// Import pages 0, 2, 4 (one-based: pages 1, 3, 5) from Source
// and append them at the end of Pdf1
Pdf1.ImportPagesByIndex(Source, [0, 2, 4], Pdf1.PageCount);
// Empty array imports every source page
// Pdf1.ImportPagesByIndex(Source, [], 0);
finally
Source.Free;
end;
end;
// ImportNPagesToOne returns a brand-new TPdf whose pages are NumX*NumY
// composites of THIS document. OutputWidth/Height are PDF user units
// (1 unit = 1/72 in)
var
Composite: TPdf;
begin
Pdf1.FileName := 'C:\Slides.pdf';
Pdf1.Active := True;
// 4-up A4 landscape: 842 x 595 pt, 2 columns x 2 rows
Composite := Pdf1.ImportNPagesToOne(842, 595, 2, 2);
try
if Composite <> nil then
Composite.SaveAs('C:\Slides_4up.pdf');
finally
Composite.Free;
end;
end;
// MovePages takes the zero-based indices of the pages to move plus the
// destination index for the first moved page after the move completes
// Other pages shift around the moved block so the document length stays
// the same
//
// Pavyzdys: in a 5-page document with pages numbered [0,1,2,3,4],
// MovePages([2, 3], 0) reorders to [2, 3, 0, 1, 4]
if not Pdf1.MovePages([2, 3], 0) then
ShowMessage('Invalid indices passed to MovePages');
// CreateXObjectFromPage manufactures a reusable Form XObject handle from
// any page of any other TPdf. Stamp that handle onto as many pages of
// THIS document as you want — each stamp is a single PDFium page object
// that can be positioned, scaled, and rotated through the matrix API
uses FPdfMatrix, FPdfView;
var
WatermarkSource: TPdf;
XObj: TPdfXObject;
PageObj: FPDF_PAGEOBJECT;
M: TPdfMatrix;
RawMatrix: FS_MATRIX;
I: Integer;
begin
WatermarkSource := TPdf.Create(nil);
try
WatermarkSource.FileName := 'C:\Watermarks\Confidential.pdf';
WatermarkSource.Active := True;
// Wrap page 0 of WatermarkSource as a reusable XObject
XObj := Pdf1.CreateXObjectFromPage(WatermarkSource, 0);
try
for I := 1 to Pdf1.PageCount do
begin
Pdf1.PageNumber := I;
PageObj := Pdf1.InsertFormObjectFromXObject(XObj);
if PageObj = nil then Continue;
// Centre the watermark on the page
M := TPdfMatrix.Create;
try
M.Scale(0.5, 0.5);
M.Translate(0.25 * Pdf1.PageWidth, 0.5 * Pdf1.PageHeight);
RawMatrix := M.Handle;
FPDFPageObj_SetMatrix(PageObj, RawMatrix);
finally
M.Free;
end;
Pdf1.UpdatePage;
end;
finally
XObj.Free; // closes the FPDF_XOBJECT handle
end;
Pdf1.SaveAs('C:\Watermarked.pdf');
finally
WatermarkSource.Free;
end;
end;
Demo\Delphi\WatermarkStamp, Demo\Lazarus\WatermarkStamp ir Demo\CBuilder\WatermarkStamp projektai paverčia šį modelį vykdomu darbo srautu: jie sukuria tikslinį PDF ir pakartotinai naudojamą štampo PDF, apgaubia štampo puslapį su CreateXObjectFromPage, įterpia tą patį Form XObject į kiekvieną tikslinį puslapį, taiko TPdfMatrix transformacijas centruotiems vandenženkliams ir viršutinio dešiniojo kampo štampams bei prideda pasirenkamas puslapių numerių etiketes prieš įrašydami rezultatą
// AddImage(FileName) accepts any format registered with the VCL or LCL
// graphics units (BMP, PNG via PngImage, JPG, ...)
Pdf1.AddImage('C:\Photo.png', 100, 500, 200, 150);
// AddImage(TBitmap) skips the TPicture intermediary, ideal when the
// bitmap already comes from rendering or batch generation work
var
Bitmap: TBitmap;
begin
Bitmap := Pdf1.RenderPage(0, 0, 595, 842);
try
Pdf1.PageNumber := 2;
Pdf1.AddImage(Bitmap, 50, 50, 250, 350);
Pdf1.UpdatePage;
finally
Bitmap.Free;
end;
end;
Demo\Delphi\ImageToPDF, Demo\CBuilder\ImageToPDF ir Demo\Lazarus\ImageToPDF projektai paverčia tai visa paketinio darbo eiga: pasirenkami keli vaizdų failai, peržiūrimas pasirinktas elementas, kiekvienam vaizdui sukuriamas vienas PDF puslapis, kiekvienas vaizdas masteliuojamas į A4 stačiosios arba gulsčiosios orientacijos puslapį, rezultatas įrašomas ir sugeneruotas PDF atidaromas
var
MatchCount: Integer;
begin
// Paint a clYellow mask over every match on the view's current page
// Switching to a different page clears the highlight automatically
PdfView1.HighlightColor := clYellow;
MatchCount := PdfView1.HighlightSearchText('invoice', False{Case}, True{Word});
Status.Caption := Format('%d match(es) on this page', [MatchCount]);
// Programmatically remove the overlay before the page changes
PdfView1.ClearHighlight;
end;
// FitMode keeps long documents framed during Resize or page changes
// Setting Zoom directly cancels FitMode (it reverts to pfmNone)
PdfView1.FitMode := pfmFitPage; // whole page in viewport
// PdfView1.FitMode := pfmFitWidth; // page width matches viewport width
// PdfView1.FitMode := pfmActualSize; // 100%
// PageColor decouples the rendered PDF page from the host control's Color
// — typical dark-mode viewer setup keeps the scroll area dark while the
// PDF page stays paper-white
PdfView1.Color := clBlack; // scroll area
PdfView1.PageColor := clWhite; // PDF page background
// Optional drop shadow and page border to lift the page off a dark bg
PdfView1.PageShadowSize := 6;
PdfView1.PageShadowColor := $00404040;
PdfView1.PageBorderColor := clGray;
Demo\Delphi\ViewerInteractionLab, Demo\CBuilder\ViewerInteractionLab ir Demo\Lazarus\ViewerInteractionLab projektai vienoje kompaktiškoje formoje išlaiko modernią TPdfView sąveikos sąsają: atidarykite arba sukurkite pavyzdinį PDF, perjunkite DisplayMode, taikykite FitMode, keiskite PageColor, pasukite puslapius, paryškinkite dabartinio puslapio paieškos radinius su HighlightSearchText, įjunkite arba išjunkite naudotojo teksto pažymėjimą, peržiūrėkite SelectedText, kvieskite SelectAll, CopySelectionToClipboard ir ClearSelection, o judant pele virš puslapio stebėkite, kaip būsenos juostoje atsinaujina DeviceToPage koordinatės
Demo\Delphi\SearchAndSelect, Demo\CBuilder\SearchAndSelect ir Demo\Lazarus\SearchAndSelect projektai paverčia žiūryklės paieškos ir pažymėjimo darbo eigą atskirais pavyzdžiais. Jie atidaro arba sukuria PDF, pateikia visų puslapių paieškos rezultatus su puslapio numeriu, simbolio indeksu ir peržiūros tekstu, palaiko Previous / Next navigaciją ir dukart spustelėjimu pasiekiamą rezultatą, paryškina dabartinio puslapio atitikmenis su HighlightSearchText, pateikia match-case ir whole-word parinktis, perjungia AllowUserTextSelection, peržiūri SelectedText, valdo SelectAll, CopySelectionToClipboard ir ClearSelection mygtukais ir leidžia naudotojams perjungti vieno puslapio bei išplėstą rodymo režimą
Demo\Delphi\PrintPreferences, Demo\CBuilder\PrintPreferences ir Demo\Lazarus\PrintPreferences projektai prieš spausdinimą nuskaito autoriaus spausdinimo nuostatas. Jie rodo PrintCopies, PrintPageRanges, PrintScaling ir PrintPaperHandling, gali nukopijuoti autoriaus nurodytas kopijas ir ribas į spausdinimo įvestis ir parodo, kaip SetPdfPrintPaperHandlingDevMode susieja PDF dvipusio spausdinimo ketinimą su Windows DEVMODE
Demo\Delphi\PrintPDF, Demo\CBuilder\PrintPDF ir Demo\Lazarus\PrintPDF projektai rodo standartinę spausdinimo eigą: atidarykite PDF, peržiūrėkite puslapius, pasirinkite puslapių ribas ir kopijas platformos spausdinimo dialoge, laikykitės grupavimo režimo, atvaizduokite kiekvieną puslapį per TPdf.RenderPage ir pateikite spausdinimo eigą su atšaukimu. Delphi pavyzdys taip pat priima nutemptus PDF failus greitam įkėlimui
Demo\Delphi\MultiPageViewer, Demo\CBuilder\MultiPageViewer ir Demo\Lazarus\MultiPageViewer projektai išbando nuolatinį, išskleistą ir viršelį suprantantį peržiūros režimą su įprasta puslapių navigacija ir mastelio keitimo eiga. Jie taip pat naudingi tikrinant atidarymo iki pirmo puslapio greitį ir atvaizdavimo spartą labai dideliuose PDF: atliekant didelių failų bandymus, 2.x GB dokumentai, kuriems Acrobat arba Foxit iki pirmo vaizdo gali skirti 20-30 sekundžių, PDFiumPas žiūryklės kelyje gali tapti naudojami beveik iš karto
Demo\Delphi\SplitView, Demo\CBuilder\SplitView ir Demo\Lazarus\SplitView projektai rodo PDF peržiūrą greta. C++Builder ir Lazarus pavyzdžiai sutelkia dėmesį į dviejų arba trijų dalių palyginimą, aktyvios peržiūros parinkimą, pasirenkamas sinchronizuotas navigacijos komandas, bendrus mastelio nustatymus ir pasirinktai peržiūrai arba visoms įkeltoms peržiūroms taikomą pasukimą. Naudokite šiuos pavyzdžius dideliems dokumentams lyginti išlaikydami pirmą naudojamą peržiūrą ir tolesnį puslapių atvaizdavimą reaguojančius; tie patys 2.x GB PDF failai, kuriems Acrobat arba Foxit gali prireikti 20-30 sekundžių atidarymui, PDFiumPas žiūryklės kelyje gali tapti naudojami beveik iš karto
Demo\Delphi\SecurityAudit, Demo\CBuilder\SecurityAudit ir Demo\Lazarus\SecurityAudit projektai atidaro PDF tik skaitymui ir pateikia leidimų būseną, įterptus priedus, dokumento JavaScript veiksmus, URI ir Launch nuorodų anotacijas, žiniatinklio nuorodas, parašų santraukas, XFA būseną, V8 pagalbinių priemonių prieinamumą ir nepalaikomų funkcijų iškvietas. Tą pačią suvestinę ir radinių eilutes galima įrašyti arba nukopijuoti kaip TXT audito ataskaitą arba įrašyti kaip struktūruotą JSON. Jos skirtos pagrindinės programos rizikos panelėms, o ne kenkėjiškos programinės įrangos aptikimui
// LinkOptions controls automatic handling of the four PDF link action
// types. Defaults enable goto and URI only; launch (run a program) and
// embedded GotoR (jump to another file) stay OFF so a stray click cannot
// run arbitrary code
PdfView1.LinkOptions :=
[loAutoGoto, loAutoOpenURI]; // safe defaults
// OnAnnotationLinkClick fires for in-document destinations (page jumps,
// named destinations, action chains). Mark Handled = True to prevent the
// view from auto-following the link
procedure TForm1.PdfView1AnnotationLinkClick(Sender: TObject;
LinkIndex: Integer; const Action: TPdfAction;
var Handled: Boolean);
begin
if Action.Kind = paUri then
begin
if MessageDlg('Open ' + Action.Uri + '?', mtConfirmation, [mbYes, mbNo], 0)
<> mrYes then
Handled := True; // suppress auto-handling
end;
end;
// OnWebLinkClick fires for URI strings discovered by PDFium's web-link
// scanner (auto-detected URLs in the text stream, even without an
// /A <</S/URI...>> annotation)
procedure TForm1.PdfView1WebLinkClick(Sender: TObject;
WebLinkIndex: Integer; const Url: WString;
var Handled: Boolean);
begin
Log.Add('Web link clicked: ' + string(Url));
end;
// On the focused AcroForm widget, six new methods drive PDFium's form
// edit history. All six short-circuit safely if no widget is focused or
// the document carries no AcroForm
procedure TForm1.btnSelectAllClick(Sender: TObject);
begin
PdfView1.SelectAllFormText;
EditMenuCopy.Caption := 'Copy: ' + string(PdfView1.GetSelectedFormText);
end;
procedure TForm1.btnUndoClick(Sender: TObject);
begin
btnUndo.Enabled := PdfView1.FormCanUndo;
btnRedo.Enabled := PdfView1.FormCanRedo;
if PdfView1.FormCanUndo then
PdfView1.FormUndo;
end;
procedure TForm1.btnRedoClick(Sender: TObject);
begin
if PdfView1.FormCanRedo then
PdfView1.FormRedo;
end;
// All three default to True so existing apps upgrade with no behaviour
// change. Flip them False for kiosks, preview panes, or read-only
// embeddings without subclassing TPdfView
PdfView1.AllowUserPageChange := False; // PgUp/PgDn/Ctrl+Pradžia/End
PdfView1.ChangePageOnMouseScrolling := False; // wheel up/down jumps
PdfView1.AllowUserTextSelection := False; // mouse/keyboard text selection
// Ctrl+wheel is reserved for zoom and is skipped by the navigation
// handler regardless of ChangePageOnMouseScrolling.
// TPdfThumbnailView (unit FPdfThumbnail) renders one page thumbnail per
// row in a scrollable side panel
uses FPdfThumbnail;
procedure TForm1.FormCreate(Sender: TObject);
begin
ThumbView.Pdf := Pdf1;
ThumbView.ThumbnailWidth := 120;
ThumbView.ThumbnailHeight := 160;
ThumbView.SelectionColor := $00CFA85F; // warm highlight
ThumbView.OnPageClick := ThumbViewPageClick;
end;
procedure TForm1.ThumbViewPageClick(Sender: TObject; PageIndex: Integer);
begin
PdfView1.PageNumber := PageIndex + 1; // PageIndex is zero-based
end;
procedure TForm1.PdfView1PageNumberPakeista(Sender: TObject);
begin
ThumbView.CurrentPageIndex := PdfView1.PageNumber - 1;
end;
// Pattern used by Demo\Delphi\BatchExport, Demo\CBuilder\BatchExport,
// and Demo\Lazarus\BatchExport. One TPdf per file, IPdfCancellationToken
// for cancel-from-UI, TPdfStreamAdapter for buffered file load
uses FPdfAsync;
procedure ExportBatch(const Files: TArray<string>;
const OutDir: string; DPI: Integer; Quality: Integer;
const ACancelToken: IPdfCancellationToken);
var
I, J: Integer;
Job: TPdf;
Bmp: TBitmap;
Jpeg: TJPEGImage;
begin
for I := 0 to High(Files) do
begin
if ACancelToken.IsCancelled then Break;
OverallProgress.Position := I;
Job := TPdf.Create(nil);
try
Job.FileName := Files[I];
Job.Active := True;
PageProgress.Max := Job.PageCount;
for J := 1 to Job.PageCount do
begin
if ACancelToken.IsCancelled then Break;
PageProgress.Position := J;
Job.PageNumber := J;
Bmp := Job.RenderPage(
0, 0,
Round(Job.PageWidth * DPI / 72),
Round(Job.PageHeight * DPI / 72));
try
Jpeg := TJPEGImage.Create;
try
Jpeg.CompressionQuality := Quality;
Jpeg.Assign(Bmp);
Jpeg.SaveToFile(Format('%s\%s.p%.3d.jpg',
[OutDir, ExtractFileName(Files[I]), J]));
finally
Jpeg.Free;
end;
finally
Bmp.Free;
end;
end;
finally
Job.Free;
end;
end;
end;
procedure FitCurrentPage;
begin
PdfView1.Zoom := PdfView1.PageZoom[PdfView1.PageNumber];
end;
procedure InspectViewerPoint(X, Y: Integer);
var
PageNo: Integer;
PageX, PageY: Double;
CharIndex: Integer;
Ch: WString;
begin
PageNo := PdfView1.PageNumber;
if not PdfView1.DeviceToPage(X, Y, PageNo, PageX, PageY) then
Exit;
CharIndex := PdfView1.CharacterIndexAtPos(X, Y, 8, 8);
if CharIndex >= 0 then
begin
Ch := PdfView1.Text(CharIndex, 1);
ShowMessage(Format('Page %d, X %.2f, Y %.2f, character %s',
[PageNo, PageX, PageY, string(Ch)]));
end;
end;
function LoadPdfSafely(const FileName: string): Boolean;
begin
Result := False;
if not FileExists(FileName) then
Exit;
try
Pdf1.FileName := FileName;
Pdf1.Active := True;
Result := Pdf1.Active;
except
Result := False;
end;
end;
function ExtractTextSafely(PageNo: Integer): WString;
begin
Result := '';
if not Pdf1.Active then
Exit;
if (PageNo < 1) or (PageNo > Pdf1.PageCount) then
Exit;
Pdf1.PageNumber := PageNo;
Result := Pdf1.Text;
end;
// IsTagged is a cheap catalog probe — True when /StructTreeRoot exists
// StructureElements materialises the tree into a flat array of
// TPdfStructureElement records with type, title, alternate text, actual
// text, expansion text, language, level, parent index, and child / marked
// content / attribute counts
var
Elements: TPdfStructureElements;
I: Integer;
begin
if not Pdf1.IsTagged then
begin
Log.Add('Document is NOT tagged — accessibility tools may struggle.');
Exit;
end;
if Pdf1.Language = '' then
Log.Add('Tagged PDF without /Lang — fails PDF/UA.');
Elements := Pdf1.StructureElements;
for I := 0 to High(Elements) do
Log.Add(StringOfChar(' ', Elements[I].Level * 2)
+ Elements[I].StructType + ' "' + Elements[I].Title + '"');
end;
// SetPdfPrintMode is a global function that maps to PDFium's
// FPDF_SetPrintMode. Use the matching TPdfPrintMode value for the
// printer driver in use
SetPdfPrintMode(pmEmf); // GDI EMF (default)
// SetPdfPrintMode(pmTextOnly); // text-only rendering
// SetPdfPrintMode(pmPostScript2); // PostScript Level 2
// SetPdfPrintMode(pmPostScript3); // PostScript Level 3
// SetPdfPrintMode(pmPostScript2PassThrough);
// SetPdfPrintMode(pmPostScript3PassThrough);
// SetPdfPrintMode(pmEmfImageMasks); // EMF + image masks
// SetPdfPrintMode(pmPostScript3Type42); // PostScript 3 + Type 42 fonts
// PrintCopies, PrintPageRanges, PrintScaling, and PrintPaperHandling are
// the viewer-preference dictionary entries — they encode what the
// document author wanted PDF readers to default to
var
Ranges: TPrintPageRanges;
Range: TPrintPageRange;
begin
ShowMessage('Suggested copies: ' + IntToStr(Pdf1.PrintCopies));
ShowMessage('Print scaling: ' + GetEnumName(TypeInfo(TPrintScaling),
Ord(Pdf1.PrintScaling)));
Ranges := Pdf1.PrintPageRanges; // one-based ranges
for Range in Ranges do
Log.Add(Format('Pages %d..%d', [Range.First, Range.Last]));
if SetPdfPrintPaperHandlingDevMode(PrinterDevMode, Pdf1.PrintPaperHandling) then
ApplyPrinterDevMode(PrinterDevMode);
end;
// Document-level JavaScript is stored in the /Names /JavaScript name
// tree. JavaScriptAction[i] returns one entry; JavaScriptActions returns
// the full array
var
I: Integer;
Action: TPdfJavaScriptAction;
begin
for I := 0 to Pdf1.JavaScriptActionCount - 1 do
begin
Action := Pdf1.JavaScriptAction[I];
Memo1.Lines.Add('Name: ' + string(Action.Name));
Memo1.Lines.Add('Script: ' + string(Action.Script));
Memo1.Lines.Add('---');
end;
end;
procedure ProcessMultiplePages;
var
I: Integer;
PageText: WString;
begin
for I := 1 to Pdf1.PageCount do
begin
Pdf1.PageNumber := I;
PageText := Pdf1.Text;
ProcessPageText(PageText);
end;
end;
procedure SetOptimalRenderOptions;
begin
PdfView1.Options := [reAnnotations, reLcd];
end;
// Zero-copy render path (default since v1.21.0): RenderPage writes
// directly into the destination TBitmap's DIB buffer when callers pass a
// pre-allocated bitmap, avoiding one width * height * 4 bytes copy
procedure RenderIntoCallerBitmap(Bitmap: TBitmap);
begin
Bitmap.PixelFormat := pf32bit;
Bitmap.SetSize(2480, 3508); // A4 @ 300 DPI
Pdf1.RenderPage(Bitmap, 0, 0, Bitmap.Width, Bitmap.Height);
end;